Audio by mark jones

Bryston Ltd. has been designing and manufacturing state of the art specialty electronics to both the consumer and professional audio marketplaces for over 35 years.

Bryston has a major commitment in producing the most accurate and reliable product available by maintaining an extensive research and development division which is constantly looking for ways to improve the performance, value, and reliability of our products.

Other Products by Bryston
  • All
  • Preamps
  • Amplifiers
  • Digital
  • Analog
  • Loudspeakers
  • Power Isolation
BR-20 Preamplifier
$5,995

The Bryston BR-20 merges our newly designed, best ever fully balanced analog preamp architecture with the award-winning digital to analog conversion (DAC) and built-in streaming borrowed from our well regarded BDP series. The BR-20 is the ultimate audiophile hub, including the features and connectivity to accommodate the demands of the modern audiophile. From our best ever built-in headphone amplifier to optional phono inputs for vinyl collectors and 4K HDMI inputs for DSD playback and A/V connectivity, the BR-20 has been engineered to work with nearly any source. Bryston’s innovative analog circuitry designed specifically for the BR-20 preamplifier has yielded the lowest noise and distortion measurements in the 40-plus year history of the Bryston brand. For the music enthusiast, this means more lifelike performances, more detail, and more dimensionality from the recordings you love. The BR-20 comes with the BR-4 remote plus RS232 and network connectivity for limitless control options..

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BR-20-silver-17-Oblique-2-web-1-1.jpg
BR-20 Preamplifier technical specs
  • Features2 ea. Balanced and Single Ended Inputs2 ea. Balanced OutputsAll New fully discrete Class A analog circuitryRelay switching on all inputsSoftware control and balanced action volume controlIncluded high-res DAC up to PCM 384 kHz / 32 bit and DSD x 4Digital Inputs include 2 ea. AES/EBU, TOSLINK, S/PDIF (RCA) and 1 ea. USBncluded high resolution streamer plays back virtually any file format at native resolution. Control entire system using intuitive webUI on a smartphone, tablet, or computer.Low Z Headphone amplifier is a dedicated headphone circuit capable of powering even very difficult to drive headphones.
2.5B Cubed Dual-Mono Amplifier
$4,445

For some, it’s a gateway drug. The 2.5B³ is the least expensive way to get a Cubed Series amplifier, but it’s far from cheap. Made with the same materials and loving care in our Peterborough, Ontario factory as every other product we make, the 2.5B³ will still surprise you with it’s startling dynamics, crystal clarity and 3D enveloping spaciousness. You’ve really got to hear one to appreciate what an incredible deal this model is.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/2_5B3-Oblique-Silver-17-alpha-web.jpg
2.5B Cubed Dual-Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input2 Channels each with fully independent power supplies including transformers135W into 8 ohms (and up to 180 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiersSwitchable gain (23dB or 29dB)Fully convection cooled means no noisy fansDC trigger for automated turn on and turn offLegendary Bryston 20 Year Warranty
3B Cubed Dual-Mono Amplifier
4,500

Way back in 1973, a young engineer named Chris Russell took his new prototype amplifier, the PRO 3, to an A list studio in Toronto for an audition. He left with an order for two.

Nearly five decades later, that amp has evolved into the Bryston 3B Cubed. It’s twice as powerful as the original and ten times as impressive. Though it’s one of our smaller amplifiers, it features all the same technology found in our venerable 4B. One big advantage, however, is the shallow depth. The 3B Cubed is a great all around amp, but is especially useful for shallow mounting depth applications.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/3B-17-Silver-front-alpha-web.jpg
3B Cubed Dual-Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input 2 Channels each with fully independent power supplies including transformers 200W into 8 ohms (and up to 300 into 4 ohms) per channel The patented Salomie circuit found in all Cubed Series amplifiers Switchable gain (23dB or 29dB) Fully convection cooled means no noisy fans Machined and anodized aluminum enclosure and dress panel Less than 500mW standby power consumption SoftStart microprocessor controlled startup sequence won't trip circuit breakers DC trigger for automated turn on and turn off Legendary Bryston 20 Year Warranty
4B Cubed Dual-Mono Amplifier
$7,195

A rarified few components in audiophile lore have become so ubiquitous that nearly every music lover once had, lusted after, or if they’re really lucky, currently owns one. One such legend is the Bryston 4B. This product has been manufactured continuously (though often refined) since 1978. Currently this venerated amplifier is on its 6th generation, and it’s never been better. Now rated at 300 watts per channel into 8 ohms, (and upwards of 500 into 4 ohms), this true dual-mono amplifier is powerful enough for practically any speaker, yet it’s priced to remain within reach. The degree of clarity, power, nuance, and outright truthfulness of this amp is stunning. If you’ve always wanted one, maybe now is just the right time.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/4B3-Silver-17-Oblique-small.jpg
4B Cubed Dual-Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input 2 Channels each with fully independent power supplies including transformers 300W into 8 ohms (and up to 500 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiers Switchable gain (23dB or 29dB) Fully convection cooled means no noisy fans Machined and anodized aluminum enclosure and dress panel Less than 500mW standby power consumption SoftStart microprocessor controlled startup sequence won't trip circuit breakers DC trigger for automated turn on and turn off Legendary Bryston 20 Year Warranty
7B Cubed Mono Amplifier
$7,195 Each

7B³ mono amplifiers are truly special. Though they don’t look much different, they’re a big step up from the venerable 4B³. The power supply for this amplifier is built around a specially wound transformer that is substantially more efficient than normal. With twice the power available, they can drive all but the most brutal loads to lifelike levels. But even at whisper quiet levels, they reveal detail and nuance in your recordings that you never knew existed until now.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/7B3-Oblique-Stack-Pair-white-bg-web.jpg
7B Cubed Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input Dual binding post pairs600W into 8 ohms (and up to 900 into 4 ohms)The patented Salomie circuit found in all Cubed Series amplifiers Switchable gain (23dB or 29dB) Fully convection cooled means no noisy fans Machined and anodized aluminum enclosure and dress panel Less than 500mW standby power consumption SoftStart microprocessor controlled startup sequence won't trip circuit breakers DC trigger for automated turn on and turn off Legendary Bryston 20 Year Warranty
14B Cubed Dual-Mono Amplifier
$11,695

To some, their favorite Bryston amplifier is the 14B³. It features huge power, utterly silent noise floor, grace in an iron fist. The Bryston 14B³ has the kind of power usually only found in monoblocks, yet this model is a dual channel. That’s not to say it is compact, however. This amplifier is big and heavy. Yet it drives any loudspeaker with agility and speed rendering your favorite music with exquisite detail.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/14B3-Black-19-high-angle-oblique-web.jpg
14B Cubed Dual-Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input 2 Channels each with fully independent power supplies including transformers600W into 8 ohms (and up to 900 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiers Switchable gain (23dB or 29dB) Fully convection cooled means no noisy fans Machined and anodized aluminum enclosure and dress panel Less than 500mW standby power consumption SoftStart microprocessor controlled startup sequence won't trip circuit breakers DC trigger for automated turn on and turn off Legendary Bryston 20 Year Warranty
21B Cubed Tri-Mono Amplifier
$12,695 Each

Bryston impressed the audiophile community with an ultimate fully active loudspeaker system that let you choose your own amplifiers. Listeners were free to build 6-channel systems any way they liked. Now Bryston introduces the 21B³-an amplifier dedicated to bringing Cubed Series excellence to an easy to manage package. Each 21B³ has 3 channels. One is rated at 600 watts, the other two are rated at 300 watts each. Active loudspeaker customers will use the high powered channel for the bass section and smaller channels for the midrange and high frequency sections of their 3 way systems. Since the 21B³ is based on our 7B³ and 4B³ amps, it can also be used to power any 3 channels such as the front LCR in a home theatre.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/21b-17-silver-oblique-low-angle-web.jpg
21B Cubed Tri-Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input 3 Channels each with fully independent power supplies including transformers600W into 8 ohms (and up to 900 into 4 ohms) for one channel. Two more channels each rated at 300W into 8 ohms and 500W into 4 ohms.The patented Salomie circuit found in all Cubed Series amplifiers Switchable gain (23dB or 29dB) Fully convection cooled means no noisy fans Machined and anodized aluminum enclosure and dress panel Less than 500mW standby power consumption SoftStart microprocessor controlled startup sequence won't trip circuit breakers DC trigger for automated turn on and turn off Legendary Bryston 20 Year Warranty
28B Cubed Mono Amplifier
$12,695 Each

Besides the fact that this is one of the most powerful amplifiers on the market and can drive virtually any loudspeaker with total grace and ease, the 28B³ monoblock amplifiers are some of the finest sounding models ever at any power output. These amplifiers take complete control over your loudspeakers and command them to be their best. Bryston first-to-last-watt philosophy demands that each of our products sounds equally amazing at all power output levels. There is no product we have ever engineered that demonstrates this philosophy better than the 28B³. Even if you don’t need all the power these amps offer, you owe yourself the pleasure of a demonstration. Hear the 28B³ today.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/28B-Front-Oblique-1-e1622060015332.jpg
28B Cubed Mono Amplifier technical specs
  • FeaturesBalanced XLR and Single ended RCA input Dual binding post pairsThunderous 1000W into 8 ohms (and up to 1800 into 4 ohms)The patented Salomie circuit found in all Cubed Series amplifiers Fully convection cooled means no noisy fans Machined and anodized aluminum enclosure and dress panel Less than 500mW standby power consumption SoftStart microprocessor controlled startup sequence won't trip circuit breakers DC trigger for automated turn on and turn off Legendary Bryston 20 Year Warranty
BP-17³ Stereo Preamplifier
$4,795

The Bryston BP17³ is the first component from Bryston to use our patented low distortion Salomie circuit at both the input and output stage. This new technology is remarkable in its ability to render even miniscule details with breathtaking clarity and lifelike scale. As a fully featured preamp, the BP-17³ is the centerpiece of your stereo. Balanced and single ended analog inputs can be used with virtually any source component. High resolution DAC and moving magnet phono options are also available.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BP-17-Cubed-silver-17-front-back-stack-web.jpg
BP-17³ Stereo Preamplifier technical specs
  • Features5 Single Ended & 2 Balanced Analog InputsFully discrete Class A analog circuitryThe patented Salomie circuit found in all Cubed Series amplifiersStandard and configurable XLR outputsFixed and variable level RCA outputsIndependent power supply for analog and digital circuits.Relay switching on all inputsProgrammable home theater bypassSoftware control and balanced action volume control
B135 Cubed Integrated Amplifier
$6,895

Bryston proves that integrated amplifiers give no ground to their separate counterparts. The B135 is literally constructed of the BP-17 preamplifier and 2.5B Cubed amplifier into a single chassis offering the best of both products without occupying extra space and costly interconnects. For those who wish to save money and space yet refuse to yield sound quality, the B135 Cubed Integrated Amplifier is a top choice.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/B135-Oblique-silver-17-web.jpg
B135 Cubed Integrated Amplifier technical specs
  • FeaturesConnect up to 6 analog sources (or 7 with tape-loop input)User configurable home theatre bypass inputTrue dual-mono amplifier section produces 135 watts per channel into 8 ohms, 180 watts per channel into 4 ohms.Patented Salomie Cubed series input circuitry for ultra low distortionFully convection cooled means no noisy fansHigh performance independently buffered headphone outputDC Trigger and 2-way RS232 for automation systemsCompatible with BR-2 remote controlLegendary Bryston 20 Year Warranty
BDA-3 Digital to Analog Converter
$3,795

We as audiophiles often seek ‘giant killer’ components. Though the phrase is loosely used, rarely, if ever do we find such elusive equipment. The BDA-3 is one of these rare specimens. An extraordinarily well engineered DAC, the BDA-3 is compatible with virtually any digital source component and features measured performance that is very near the theoretical limit of the digital audio streams it can decode. Such a well executed DAC can resolve the finest details in your digital recording with aplomb. Besides it’s superb measured performance, it’s a total joy to use and listen to. It is operationally easy to understand and sounds better than anyone could expect. Regardless of your digital audio budget, this should be on your short list.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BDA3-17-Silver-Front-Oblique-alpha-bg-web.jpg
BDA-3 Digital to Analog Converter technical specs
  • Features10 different inputs including 4 HDMI, 2 USB, AES/EBU, S/PDIF RCA, S/PDIF BNC, and ToslinkPCM support up to 384 kHz / 32 bitDSD support up to DSD-256 (x4)User selectable upsampling for some inputsSeparate power supplies for analog and digital circuitryFully discrete Class-A balanced analog outputsControl via IR, RS232, IP, or 12V triggerAluminum chassis and metalwork. Machined and anodized aluminum dress panel.
BDA-3.14 DAC / Streamer / Digital Preamplifier
$4,195

Since Bryston began developing products for digital playback enthusiasts, one thing has been constant – separate components for streaming and D to A. That changes with our new BDA-3.14. We’ve merged our BDP and BDA platforms into this one new product that starts with our BDA-3 and adds a high quality streamer internally connected with I²S – the most accurate digital interconnection method currently available. Additionally, 10 other inputs are available to make the BDA-3.14 your high resolution digital hub.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BDA314-Render-front-Alpha.jpg
BDA-3.14 DAC / Streamer / Digital Preamplifier technical specs
  • FeaturesBuilt in streamer features up to 192kHz / 24 bit playback.Tidal, Qobuz, Roon, Internet Radio and moreConnect USB or NAS drive for local library playback.Full control via web enabled device10 different inputs including 4 HDMI, 2 USB, AES/EBU, S/PDIF RCA, S/PDIF BNC, and ToslinkPCM support up to 384 kHz / 32 bitDSD support up to DSD-256 (x4)User selectable upsampling for some inputsSeparate power supplies for analog and digital circuitryFully discrete Class-A balanced analog outputs
BDP-3 Digital Music Player
$4,195

Serious music lovers collect their favorite tunes from a wide variety of sources. The BDP-3 can collate them all into a gigantic library at your fingertips. As a bit-perfect player, it plays music just as intended without unnecessary format conversion or upsampling. The digital output is a perfect facsimile of the original file so you hear your music in all it’s original detail. Bryston regularly issues firmware updates that add new features and keep BDPs well maintained. You are not likely to find a better sounding easier to use music player than the flagship BDP-3.

https://audiobymarkjones.ca/wp-content/uploads/2021/04/BDP-3.png
BDP-3 Digital Music Player technical specs
  • FeaturesPlay music from attached USB drives, NAS, Tidal, Qobuz, Internet Radio, Roon Ready, and more sourcesPCM support up to 384 kHz / 32 bit DSD output up to DSD-128 (x2)Digital output via USB, AES/EBU, or S/PDIFLinear power supply Gigabit EthernetUSB2.0 + 2 separate USB 3.0 busesControl via IR, RS232 or 12V trigger, Web App works on iOS, Android, MacOS, Windows, and more.Steel chassis and metalwork. Machined and anodized aluminum dress panel.
BCD-3 CD Player
$4,095

When asked why we bother to produce a stand alone CD player in this modern era of high resolution music and streaming, I am reminded of several reasons. First is that so many of us have massive CD collections that are as capable of sparking joy today as they were years ago when first purchased. CDs can sound unbelievably good–a testament to their ability to continue to out sell digital downloads. Finally remember that for so many music lovers, learning a new digital playback method simply gets in the way of enjoying music. If any of these resonate with you, perhaps the BCD-3 will be the last CD player you’ll ever need.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BCD-3-Black-17-Front-white-bg-web.jpg
BCD-3 CD Player technical specs
  • FeaturesRedbook CD playerBalanced XLR and single ended RCA outputDigital out via AES/EBU or S/PDIF RCANetwork connectivity for firmware updates and control via web UI or automation systemsRS232 / IR supportRugged metal CD tray with support railsLarge clear OLED displayBuilt using identical DAC circuitry originally developed for BDA-3 DAC
BP-2 MM Moving Magnet Phono Gain Stage
$1,100

Phono gain stages are rather un-glamorous. But that’s the point. This one trick pony simply accepts analog audio from your turntable’s cartridge and amplifies it to a level that your main preamplifier can understand. What makes the BP-2 MM so special is that it can take such a minuscule signal–2mV or so and amplify it with so little distortion and so little added noise. If it weren’t for the characteristic smoothness and organic sound of vinyl, you might swear you were listening to digital.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BP-2-MM-Black-Oblique-web.jpg
BP-2 MM Moving Magnet Phono Gain Stage technical specs
  • FeaturesApplies 41dB of gain from your moving magnet phono cartridge or high output MC cartridgeClass A discrete operational amplifiersUltra precise RIAA equalizationPowered from external Bryston PSUVery quiet operation and very low distortionCompact chassis can be placed nearby turntable or preamplifierFront panel Mute switchInternally configurable for capacitive loading
TF-2 Moving Coil Step-Up Transformer
$1,600

Maybe it’s upgrade time. Out with the MM cartridge, and in with the new high resolution MC model. The Bryston TF-2 is the perfect companion that will bridge the gap between your perfectly fine low-gain MM stage and your new low output cartridge. By providing either 20dB or 31dB of gain (your choice at time of order) without the use of any active circuitry, you can get just the boost you need with superb clarity and virtually no added distortion. The Bryston TF-2 is a top quality step-up-a difference you’ll hear right from the first listen.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/TF-2-20-silver-Front-Oblique-Alpha-web.jpg
TF-2 Moving Coil Step-Up Transformer technical specs
  • FeaturesAvailable in 20 or 31dB gainTotally passive gain stageUse with existing MM gain stage when using low to medium output cartridges
PS-3 DC Regulated Power Supply
$1,200

How important is the power supply to audio equipment? After all, amplified audio is nothing more than modulated power from the wall that’s been rectified, filtered, and smoothed along the way. Bryston’s quest to make the perfect power supply has resulted in two models-the PS-3 and MPS-2. Each is an ideal DC power supply to attached equipment giving them smooth, clean, DC power to modulate with incoming audio. These are mandatory power supplies for some equipment we manufacture and are not intended for use with other gear.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/PS-3-Silver-Oblique-Alpha-web.jpg
PS-3 DC Regulated Power Supply technical specs
BIT 20 RM Series Isolation Transformers
$4,299

You simply cannot have distortion free audio playback without clean power. Sure, our analog equipment has exceptionally good power supplies which filter incoming AC effectively, but the performance improvement gained from providing your whole system with unimpeded clean power is remarkable.

Choose the BIT15 if you have small amplifiers (100W or less) or simply want to give your source components and preamplifier the cleanest power possible. The BIT20 adds extra power output handling and mechanical isolation of the transformer for even further reduced in-room noise.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BIT20-silver-front-black-glass-floor-2-web.jpg
BIT 20 RM Series Isolation Transformers technical specs
BIT 15 RM Series Isolation Transformers
$2,999

You simply cannot have distortion free audio playback without clean power. Sure, our analog equipment has exceptionally good power supplies which filter incoming AC effectively, but the performance improvement gained from providing your whole system with unimpeded clean power is remarkable.

Choose the BIT15 if you have small amplifiers (100W or less) or simply want to give your source components and preamplifier the cleanest power possible. The BIT20 adds extra power output handling and mechanical isolation of the transformer for even further reduced in-room noise.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/BIT20-silver-front-black-glass-floor-2-web.jpg
BIT 15 RM Series Isolation Transformers technical specs
Model T
$9,555

Bryston never meant to start making speakers. The Model T began as a project between Bryston’s James Tanner and Ian Colquohoun to develop the ultimate loudspeaker which could reproduce music with the same fidelity as our electronics. The Model T was born and quickly friends and the Bryston family put in orders for their own pairs. Emboldened by such early excitement, we distilled a full line.

The Model T achieves 118dB of dynamic range before it even starts to compress by using multiple drivers for each of it’s 3 sections. By moving twice as much air, we keep distortion to a minimum even at high output levels. The small diameter drivers, along with careful crossover tuning and cabinet construction make for the broadest dispersion characteristics among large speakers out there. This in turn makes the sweet spot far wider than audiophiles have come to expect. If you can’t have fun with these speakers, maybe you should buy a boat instead.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/Model-T-Walnut-No-Grille-Lifestyle.jpg
Model T technical specs
  • Frequency Response25Hz-20kHz ±3dB
  • Dynamic Range118 dB @ 1m anechoic
  • Impedance
  • Sensitivity89dB
  • FeaturesDual titanium dome tweeters reproduce high frequencies with incredible clarity and greater dynamics than a single driverMidranges and bass drivers are anodized aluminum for wide bandwidth and light weightTriple 8" bass drivers deliver ultra deep, powerful bass.ndustry leading in-room response linearity
Middle T
$6,870

The Middle T looks more conventional than it’s big brother, the Model T, but it’s no less special. With dual 8″ bass drivers, it can plumb the depths of the bass octave, yet it’s midrange integrates perfectly and sings with delight while it’s single tweeter soars. Most of all, this speaker makes music. The Middle T is Bryston’s most popular floor stander for good reason. It’s big and expensive enough to be awesome, but not so much to be scary.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/Middle-T.jpg
Middle T technical specs
  • Frequency Response33Hz-20kHz ±3dB
  • Dynamic Range112 dB @ 1m anechoic
  • Impedance
  • Sensitivity88dB
  • FeaturesSingle titanium dome tweeter.Midrange and dual bass drivers are anodized aluminum for wide bandwidth and light weightDual 8" bass drivers deliver ultra deep, powerful bass.Industry leading in-room response linearity
Mini T
$4,075

Everything is relative, so when we call this the Mini T, it’s really only “mini” when compared to the rest of the T lineup. That said, it’s still a shelf/stand model. When atop a Target MR stand with our custom plates, the Mini T’s performance is really more like that of a great floorstander. Bass is prodigious, dynamics are vast. imaging is beyond comprehension and it’s clear as a bell. The Mini T is a frequent star of our hi-fi shows and never ceases to amaze both the audience and us! As a direct descendent of the Model T, you should expect nothing less.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/mini-t.jpg
Mini T technical specs
  • Frequency Response33Hz-20kHz ±3dB
  • Dynamic Range112 dB @ 1m anechoic
  • Impedance
  • Sensitivity86dB
  • FeaturesSingle titanium dome tweeter.Midrange and dual bass drivers are anodized aluminum for wide bandwidth and light weight8" bass driver deliver ultra deep, powerful bass.Industry leading in-room response linearity
BAX-1 DSP Crossover
$3,495

Inside the all new BAX-1 DSP Crossover lies the magic that elevates the system to a new ultimate performance. The BAX-1 receives line level analog audio from your preamp and converts it to digital with exacting precision. Like a traditional crossover, bands are divided, but response is also corrected. Our engineers use the powerful DSP engine to precisely neutralize system response errors that would otherwise go uncorrected.

Low, midrange, and high frequency outputs are generated which then feed 6 amplifier channels.

Do you want a custom sound? You can even custom tailor the bass response to match your room using the on-board web based user interface.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/bax1.jpg
BAX-1 DSP Crossover technical specs
A1 Floorstanding Loudspeakers
$4,765

Big sound and high output capability requires large loudspeakers. This is fact. Though this model is tall, the A1 moves air with exceptionally low distortion given its slim profile. By using a linear array of small diameter drivers, Bryston is able to optimize the off axis response to produce an unusually broad listening window. The listening window is a measurement that indicates how linear the off-axis ferquency response remains and is an indicator of tonal neutrality as well as imaging ability.

Another fun fact about the A1 is that you get all of this for an incredibly compelling price–far below what you would expect for a speaker made in Canada and guaranteed for 20 years.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/A1-scaled.jpg
A1 Floorstanding Loudspeakers technical specs
A2 Floorstanding Loudspeakers
$3,810

The A2 is, for many, the perfect loudspeaker. It’s big enough to produce nearly full range sound at realistic output levels, yet small enough to fit happily into most rooms and priced less than you’d expect. By using a linear array of small diameter drivers, Bryston is able to optimize the off axis response to produce an unusually broad listening window. The listening window is a measurement that indicates how linear the off-axis ferquency response remains and is an indicator of tonal neutrality as well as imaging ability.

Consider that it’s made in Canada, guaranteed for 20 years, is ideally sized, and sounds downright awesome, and you’ve got a perfect recipe for home audio bliss.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/A2-Boston-Cherry-No-Grille-Gradient-Letter-web.jpg
A2 Floorstanding Loudspeakers technical specs
A3 Floorstanding Loudspeakers
$3,270

The first time you own floorstanding speakers is a truly special event. Finally, you can get the dynamics and deep bass you crave but never could quite achieve with small bookshelf speakers. The A3 should be your first floorstander, yet it’s good enough to be your last. By using a linear array of small diameter drivers, Bryston is able to optimize the off axis response to produce an unusually broad listening window. The listening window is a measurement that indicates how linear the off-axis frequency response remains and is an indicator of tonal neutrality as well as imaging ability.

Consider that it’s made in Canada, guaranteed for 20 years, is ideally sized, and sounds downright awesome, and you’ve got a perfect recipe for home audio bliss.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/A3-Black-Ash-No-Grille-Gradient-Letter-web.jpg
A3 Floorstanding Loudspeakers technical specs
Mini A
$1,665

Nobody expects much from a product called ‘mini’. The Mini A is a diminutive loudspeaker, but it is well bred from premium stock. Their small size and crystal clarity make for truly extraordinary detail and soundstaging. But the dynamic range is what really surprises. They’re both startlingly powerful and have far more bass than one associates with a simple 6.5″ woofer. A pair of Mini As on speaker stands are utterly holographic.

Consider that it’s made in Canada, guaranteed for 20 years, is ideally sized, and sounds downright awesome, and you’ve got a perfect recipe for home audio bliss.

https://audiobymarkjones.ca/wp-content/uploads/2021/03/Mini-A-Black-Ash-with-BDP-web.jpg
Mini A technical specs