loudspeakers

Bryston never meant to start making speakers. The Model T began as a project between Bryston’s James Tanner and Ian Colquohoun to develop the ultimate loudspeaker which could reproduce music with the same fidelity as our electronics. The Model T was born and quickly friends and the Bryston family put in orders for their own pairs. Emboldened by such early excitement, we distilled a full line.

The Model T achieves 118dB of dynamic range before it even starts to compress by using multiple drivers for each of it’s 3 sections. By moving twice as much air, we keep distortion to a minimum even at high output levels. The small diameter drivers, along with careful crossover tuning and cabinet construction make for the broadest dispersion characteristics among large speakers out there. This in turn makes the sweet spot far wider than audiophiles have come to expect. If you can’t have fun with these speakers, maybe you should buy a boat instead.

The Middle T looks more conventional than it’s big brother, the Model T, but it’s no less special. With dual 8″ bass drivers, it can plumb the depths of the bass octave, yet it’s midrange integrates perfectly and sings with delight while it’s single tweeter soars. Most of all, this speaker makes music. The Middle T is Bryston’s most popular floor stander for good reason. It’s big and expensive enough to be awesome, but not so much to be scary.

Everything is relative, so when we call this the Mini T, it’s really only “mini” when compared to the rest of the T lineup. That said, it’s still a shelf/stand model. When atop a Target MR stand with our custom plates, the Mini T’s performance is really more like that of a great floorstander. Bass is prodigious, dynamics are vast. imaging is beyond comprehension and it’s clear as a bell. The Mini T is a frequent star of our hi-fi shows and never ceases to amaze both the audience and us! As a direct descendent of the Model T, you should expect nothing less.

Inside the all new BAX-1 DSP Crossover lies the magic that elevates the system to a new ultimate performance. The BAX-1 receives line level analog audio from your preamp and converts it to digital with exacting precision. Like a traditional crossover, bands are divided, but response is also corrected. Our engineers use the powerful DSP engine to precisely neutralize system response errors that would otherwise go uncorrected.

Low, midrange, and high frequency outputs are generated which then feed 6 amplifier channels.

Do you want a custom sound? You can even custom tailor the bass response to match your room using the on-board web based user interface.

Perfect for smaller listening rooms, the F301 is a compact, standmount or bookshelf loudspeaker offering outstanding flexibility and class leading performance. As Hi-Fi stereo pair, the F301 excels at delivering dynamic bass and the musical articulation of more expensive designs. Its high current handling is equally at home in home theatre systems where the F301’s easy to drive nature and deep bass punch are compatible with a wide range of AV amplifiers and receivers.

Taking the performance characteristic of its sibling F301 bookshelf design, the floorstanding F302, with its increased cabinet volume, takes the music listening experience to an altogether more dynamic level. The enhanced depth of bass will be appreciated even if listening to the speaker at relatively low volume levels. And the increased power handling capacity ensures that our What HiFi 5 Star F302 won’t suffer from musical compression or distortion for those times when you just have to turn up the volume. Perfect for the Hi-Fi or home theatre enthusiast.

An out and out purist audiophile design, the standmount or bookshelf F500 speaker utilises a single 150mm (6″) IsoFlareTM point source driver in a compact, ported cabinet. Offering precise imaging and intimate detailing, the F500 is ideal for small to medium listening rooms. Incorporating a down-firing port, bass energy is evenly dissipated into the room with our BassTraxTM Tractrix diffuser system.

The luxuriously finished, contemporary styled cabinet is available in a choice of dark oak or black oak real wood veneer and piano gloss black or white. Enhancing its aesthetic appeal, it has a gently curved front and rear baffle which additionally benefits the acoustic performance by reducing colouration effects.

* shown with optional FS8 stand

The award winning F501 is the smaller of the two floorstanding loudspeakers in the F500 series but capable of delivering low bass and effortless dynamics from a compact, small footprint cabinet. Bringing additional scale and power to the F500 Series’ signature clarity and articulation, the 150mm (6″) proprietary IsoFlareTM driver is accompanied by a matched 150mm (6″) bass driver. The IsoFlareTM driver delivers isotropic energy radiation with point source constant directivity providing outstanding stereo imaging, even off axis. Ideal for small to medium-sized rooms, the F501 is supplied with a dedicated plinth incorporating our BassTraxTM Tractrix diffuser system, which integrates bass energy uniformly into the room

The luxuriously finished, contemporary styled cabinet is available in a choice of dark oak or black oak real wood veneer and piano gloss black or white. Enhancing its aesthetic appeal, it has a gently curved front and rear baffle which additionally benefits the acoustic performance by reducing colouration effects. The F501 is the perfect choice for a premium Home Theatre or a Hi-Fi application.

The Special Production F501SP is a UK built version of the award-winning F501 loudspeaker. Building on the outstanding sonic performance and aesthetics of the original model, the F501SP benefits extensively from technology developed for the premium F700 Series. The IsoFlare point source driver uses a 150mm (6”) multi-fibre bass / midrange cone with FyneFlute surround, coupled with the 25mm magnesium dome compression tweeter. With an upgraded crossover to seamlessly integrate the drivers with the F501 cabinet, the SP adds Fyne’s signature aluminium sandwich plinth to enhance stability and further refine the BassTrax downward firing porting system. The connection panel has also been upgraded and features a fifth terminal to ground the driver chassis and reduce the influence of RF interference in the circuit. Celebrating this UK Special Production with enhanced cosmetics, the F501SP benefits from diamond machine cut detailing on the aluminium driver chassis, an anodised machined aluminium plinth and the option of a Piano Gloss Walnut real wood veneer finish.

The F502 floorstanding speaker delivers the series’ signature clarity and articulation along with visceral bass. The system will suit larger listening environments but is capable of revealing a huge dynamic range even when played at low volumes in smaller rooms. Isotropic energy radiation, with point source constant directivity, is provided by a 200mm (8″) proprietary IsoFlareTM driver for outstanding stereo imaging, even off axis. A matched 200mm (8″) bass driver is also fitted to the 64-litre cabinet ensuring a breath-taking Hi-Fi or home theatre experience. Ideal for medium to large-sized rooms, the F502 is supplied with a dedicated plinth incorporating our BassTraxTM Tractrix diffuser system, which integrates bass energy uniformly into the room. The luxuriously finished, contemporary styled cabinet is available in a choice of dark oak or black oak real wood veneer and piano gloss black or white. Enhancing its aesthetic appeal, it has a gently curved front and rear baffle which additionally benefits the acoustic performance by reducing colouration effects.

Improving on the F502, the UK built SP edition uses the premium 200mm (8″) IsoFlare^TM driver and 200mm (8″) bass/mid driver from the F702, featuring rigid multi-fibre cones and FyneFlute^TM roll surrounds. The IsoFlare’s 25mm magnesium compression tweeter has a unique HF wave guide pole piece delivering an incredibly even, full-range frequency response and outstanding Hi-Fi musical imaging. The F502SP also benefits from the F700’s advanced crossover components and aluminium sandwich type plinth with BassTrax tractrix profile bass diffuser, re-engineered to precisely tune the F502SP’s more compact cabinet. The SP is available in high-gloss black and high gloss white as standard, or a luxurious deep gloss lacquered walnut veneer with a diamond machine cut finish on the aluminium driver chassis.

This elegant, contemporary bookshelf loudspeaker distils the best of Fyne Audio’s new technologies and expertise into a compact bookshelf design. Built in the UK and featuring trickle down technology from our Flagship F1 series, the F700 features a 150mm IsoFlare point source driver with a BassTrax LF diffuser integrated into the down firing port. Luxury high gloss piano lacquer applied to black, white or walnut veneer is the finishing touch to the F700’s handcrafted cabinets. Refined, articulate and powerful the F700 recreates a truly natural sound in a charming compact cabinet. The perfect HiFi speaker for audiophile’s with limited space.

* shown with optional FS8 stand

This elegant, contemporary speaker distils the best of Fyne Audio’s new technologies and expertise into a midsized floorstanding design. The F702 blends a 200mm IsoFlare point source driver and 200mm multi-fibre bass driver into a twin cavity tuned cabinet with a BassTrax LF diffuser integrated into the down firing port. Articulate, powerful and capable of delivering stunning dynamics and real world volumes, the F702 is ideal for recreating a truly captivating Hi-Fi listening experience in mid to large sized rooms.

Using trickle down technology from the F1 series, this elegant, contemporary speaker distils the best of Fyne Audio’s new technologies and expertise into a midsized floorstanding design.
Built in the UK, the F703 blends a 250mm IsoFlare point source driver and 250mm multi-fibre bass driver into a twin cavity tuned cabinet with a BassTrax LF diffuser integrated into the down firing port. Articulate, powerful and capable of delivering stunning dynamics and real world volumes, the F703 recreates a truly captivating Hi-Fi listening experience for audiophiles.

Built in the UK, the F704 features the best of Fyne Audio’s new technologies and expertise distilled into a contemporary floorstanding speaker.
Using trickle down technology from the F1 Series, it blends a 300mm IsoFlare point source driver and 300mm multi-fibre bass driver into a twin cavity tuned cabinet with a BassTrax LF diffuser integrated into the down firing port. Available in luxury high gloss piano lacquer applied to black, white or walnut veneers, the flagship of the series delivers stunning dynamics for a truly captivating Hi-Fi experience.

The F1-8 loudspeaker distils the same technology and expertise utilised in its floorstanding siblings, into a smaller standmount format.
The hand crafted cabinet is supported on a machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the F1-8 features a 200mm IsoFlare low frequency driver mated to a 25mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Hand finished at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-8 represents the pinnacle of Hi-Fi UK loudspeaker design in standmount speaker format.
* shown with optional FS8 stand

The F1-10 distils Fyne Audio’s decades of HiFi point source loudspeaker expertise into a design of breath-taking acoustic performance and eye-watering beauty.
Its 250mm (10″) IsoFlare driver and twin cavity BassTrax ported cabinet deliver bass down to 28Hz while the 75mm titanium dome compression tweeter offers seamless, time aligned HF response to over 26kHz. The F1-10’s very high sensitivity (94dB/W) ensures exceptional dynamic range and compatibility with the widest range of amplifiers from single ended triode valve models to the highest power solid state designs. The BassTrax porting and high quality potentiometer controls for HF energy and presence ensure the F1-10 will deliver optimum performance irrespective of room size or placement. Available in traditional lacquered burr walnut finish with plinth top, the F1-10 offers exemplary finish and a bold statement in loudspeaker design for the audiophile.

The epic F1-12 is Fyne Audio’s flagship loudspeaker, embodying the brand’s philosophy, expertise and engineering excellence into a truly outstanding design. The imposing twin cavity cabinet is supported on a 20kg machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. At its heart, the F1-12 boasts Fyne’s largest IsoFlare driver to date. This seamlessly mates a 300mm (12″) multi-fibre cone LF unit with a 75mm titanium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Breathtakingly dynamic and revealing with a smoothly extended HF, the F1-12 delivers music with ultimate realism and listener engagement. Designed, hand crafted and hand finished at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay or a contemporary high gloss black or white, the F1-12 represents the pinnacle of UK’s Hi-Fi speaker design.

A full-range yet compact floorstanding speaker, Majik 140 will bring your music to life without dominating your room.

High frequency precision and wide dispersion are provided by the 2K Driver Array featured across the Majik range, while separate bass and mid drivers ensure musical accuracy at lower frequencies.

Majik 140 provides great value straight out of the box, as well as offering higher levels of performance through a range of upgrade options, from simple bi-wiring through to a fully Aktiv configuration within an Exakt system.

Solid aluminium upgrade stands are also available, providing greater stability and less vibration so you can enjoy better performance across the entire frequency range.

Close your eyes when you listen to these speakers and you’ll think you’re listening to a floorstanding speaker.

Using technology derived from Linn’s reference loudspeakers, Majik 109 delivers a toe-tapping musical performance wherever you position them; on a bookshelf, wall or on the specially designed stands.

A bass reflex port is hidden behind the 2K driver array, providing a deep and musical bass without the need for a large cabinet. The port is front-firing, which means you can position the speakers close to a wall without compromising bass extension.

Higher levels of performance can be easily achieved with a range of upgrade options, from simple bi-wiring through to a fully Aktiv configuration within an Exakt system.

The A1 bookshelf loudspeaker features a fully braced aluminum enclosure, beryllium dome tweeter, carbon Nanographene cone, and our renowned elliptical crossover.
The A1 enclosure is constructed using 3⁄8” thick 6061 T6 aircraft grade aluminum, similar to the enclosure developed for the Q1 and is available in an elegant brushed-aluminum, black anodized finish. An innovative internal bracing technique along with the most advanced damping materials makes the sealed enclosure incredibly rigid and free of unwanted mechanical resonances. The complete enclosure design of the A1 is evaluated in simulation using the latest FEA software along with physical testing to meet the uncompromising requirements of Magico for optimized enclosure rigidity, stability and to ensure benchmark acoustical standards.Ω

The inspiration for the new A3 was driven by the engineering challenge to create not only a full range loudspeaker that incorporates similar design philosophies found in higher-end Magico offerings but to provide an entry level category that is accessible to a new and wider audience of music enthusiasts.
The A3 enclosure is formed with machined 6061 T6 aircraft grade aluminum and includes a complex internal bracing structure that increases the stiffness and mass of the enclosure while minimizing overall resonance. A calibrated sub-enclosure provides an optimized environment for the midrange driver to operate within and without any interaction from the back wave pressure of the bass drivers. The black brushed aluminum enclosure is lustrous and stands firmly on a 4-point spiked outrigger base which provides perfect coupling to the floor for enhanced dynamic range.

The new A5 is a flagship A-Series model (3 way / 5 driver design) which incorporates the company’s first 5-inch pure midrange driver as well as enhanced midrange and bass driver cone technology. These new advanced cones achieve unprecedented stiffness-to-weight ratio, a key parameter that Magico has pursued over the past 15 years. The massive, sealed enclosure of the A5 is formed entirely of 6061-T6 aircraft grade aluminum, the same material and construction methods as in Magico’s acclaimed Q-Series. Complex internal bracing helps stiffen the entire enclosure and minimize unwanted resonances and colorations, allowing all drivers to perform with stunning resolution and dynamics. The A5 is finished in an elegant brushed black anodized aluminum with grilles available separately as an option. “The A Series has been a great success in reaching a wider audience,” says Magico’s founder, Alon Wolf. “The A5 builds on that success with a new 5-inch midrange of extraordinary musicality. And the A5 ‘plays larger,’ with powerfully extended dynamic range.”

The new S5 Mk II silhouettes its predecessor however that is where any similarity ends. Significant performance enhancements are realized with the implementation of new and advanced transducer and enclosure designs which have been distilled from the extensive engineering research devoted to the S7.
A newly designed 1-inch Magico Diamond coated Beryllium diaphragm tweeter provides smooth and extended high frequencies along with matching sensitivity, wide dispersion and increased power handling. A robust motor system and long-throw voice coil design enables lower distortion and cutoff frequencies that enhance driver integration with the midrange driver.

Towering over other S-Series models, the S7 is a full range, 3-way loudspeaker that incorporates new tweeter, midrange and bass driver designs which are derived from the engineering triumphs in the M-Pro loudspeaker.

The S7 houses three 10-inch bass drivers that have extremely powerful magnets and ultra-stiff aluminum cones which are capable of producing deep powerful bass frequencies with speed and accuracy.

Our materials science research in the properties and applications of carbon allows the M2 to feature a new monocoque enclosure. Similar in construction technique introduced in the M6, it is formed using multiple layers of carbon fiber adding up to a 3/8” thickness. Similar to the external shell of an F-35 fighter jet, this enclosure construction compared to machined or extruded aluminum parts increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.

In 2014 the introduction of the limited edition M-Project provided a glimpse of the cutting edge designs and advanced technologies that were being developed at Magico. Over the past two years intense research has been dedicated to exploring new methodologies and materials which are now incorporated in the Magico M3.

A new carbon fiber side panel design, an all-graphene midrange and bass driver design, and the phenomenal 28mm diamond coated beryllium tweeter, previously found only in the M-Project, all come together in what is the most sophisticated loudspeaker we have ever created.

The M6 is a floor standing, three-way, five-driver loudspeaker design that establishes a new pinnacle of engineering and design vision at Magico.

Since the release of the M-Project in 2014, Alon Wolf and his engineering team have worked to expand upon the ground breaking designs that were first introduced in the critically acclaimed product which included the application of carbon side panels.

The new M6 represents the culmination of such efforts and a major advance in loudspeaker design. The most compelling aspect is the six-sided, monocoque enclosure sculpted of ½” carbon fiber, leveraging the latest Aerospace materials and technologies. Similar to the external shell of an F-35 fighter jet, this method of construction increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.

With superb midrange, and build quality, all make this a true compact monitor. Available now with ribbon or dome tweeter.

ProAc has redesigned the D18 using an upgraded cabinet with new bass loading, new crossover network and the ProAc ribbon tweeter used in other ProAc models.

This new exciting model is called the D20R and with the upgrades the sound quality has improved in all areas. Improvements comprise of a new cabinet with bass loading used in D30 and D40 models. A new crossover network and a ProAc ribbon tweeter as used in D30 D40 K6. The result is a wonderful open and expansive midrange with a substantial bass, ProAc ribbon tweeter giving sweet and detailed high frequencies, a large sound stage is also a bonus.

ProAc have updated the D30 to a D30S. Still available in a dome or ribbon tweeter – Response D30DS and D30RS respectively

ProAc have developed a new bass driver using a cone similar to that used in our Response D48, the cone is made from pulp and Mika and is coated with an acoustic dope it also now has a phase plug to improve detail at the crossover point, which will give a more natural sound.

Following the successful launch of the ProAc Tablette 10 ProAc have been developing a Tablette 10 Signature version. It has taken a great deal of time to design a new bass driver with Excel magnet system and their own solid copper phase plug. The result is a bass driver with the Tablette 10 cone material and special copper magnet system.

During the design of the Tablette 10 the LS3/5A, along with other mini monitors, were compared to the Tablette 10 and in our opinion the Tablette 10 had lower colouration. The Tablette 10 Signature shares the attributes of the Tablette 10 but has a larger more projected mid-range giving excellent sound stage with a feeling of size which, is often missing in small loudspeakers.

The K1 is a special stand mounted version of the K-series, using the Kevlar cone as in the K range and the tweeter is also our proven ribbon unit. Certain modifications have been made to the Cabinet, bass driver and tweeter to make it adaptable for us to be able to develop this to be suitable for a stand mounted loudspeaker.

Although the K1 is a stand mounted loudspeaker is has a surprisingly extended and accurate bass response with the usual beautiful midrange from the K series bass driver used within the K series.

The new Kevlar drive unit was developed for the K3 and has excellent weight to the bass as well as good extension with a detailed and uncoloured midrange. This new Kevlar unit would go into a new speaker called the K3, two of these units are used with our ribbon tweeter placed centrally in our K constructed cabinet. A high quality crossover was specially designed for the K3 to seamlessly mate with the ribbon tweeter and this new crossover uses high quality components split for bi-amping and bi-wiring and connected directly to the terminals.

As far as sound quality goes the K3 has a wonderfully electrostatic type of midrange very clear and detailed, with a dynamic bass response.

We are sure the K3 will give customers who desire music from full orchestral to loud rock the desired results with ease.

The K6 Signature uses a similar cabinet to the K6 being an excellent size with its tall slim design. The K6 Signature compared to the K6 is different in many ways firstly the drive unit layout has been designed to put the ribbon tweeter at ear level when in the seated position. It also has a new ProAc three inch midrange as opposed to the two inch one used in the K6.

The K6 Signature is designed to fulfil all audiophile’s desires when it comes to a true high end loudspeaker offering an impressively accurate sound reproduction that has an amazingly flat response throughout the frequency range. The K6 signature is an impressive addition to any audiophiles home and for the first time is exclusively also available in two new beautiful wood finishes.

ProAc would like to introduce the new flagship model K10.

The K10 boasts excellent midrange detail and an impressive sound stage. The K10 features a new ProAc midrange unit with an ultra-light midrange diaphragm. This new midrange unit has a felt open back to stop colouration. The new midrange with its light diaphragm gives an exceptional, detailed midrange this is achieved by the new light diaphragm loaded by a new wave guide, the result is outstanding with an almost electrostatic open midrange.

To celebrate its history, Wharfedale has established the Heritage Series recreations of famous models from its past, entirely re-engineered using contemporary techniques and materials. The latest loudspeaker to join this collection is the Linton.

The original Linton debuted in 1965 and the line continued in various iterations until the end of the 1970s. It was a classic model of its time, viewed as a serious hi-fi speaker but also relatively affordable. Its cabinet was substantial, big enough to hold three drive units including a good-sized bass unit, yet not overly unwieldy by the standards of the day.

The new Linton has a clear family resemblance. It, too, is a three-way standmount model – a rarity in the modern era – retaining similar proportions to the classic Linton models. Its wood-veneered cabinet has a vintage look, yet the standard of finish is distinctly contemporary.

Wharfedale’s new EVO4 has grown out of the extensive research and development that produced the ELYSIAN flagship loudspeakers and borrows much of the technology involved in ELYSIAN.
The primary focus is on the AMT development resulting in a radically different way of reproducing high frequency detail efficiently and accurately. Similar cabinet technology to ELYSIAN provides a stable and solid foundation for the drive units with radiused edges to help integrate the driver output with the room acoustics. In addition the unique SLPP bass reflex system, as developed for ELYSIAN, is now incorporated in EVO4.

Wharfedale’s new EVO4 has grown out of the extensive research and development that produced the ELYSIAN flagship loudspeakers and borrows much of the technology involved in ELYSIAN.

The primary focus is on the AMT development resulting in a radically different way of reproducing high frequency detail efficiently and accurately. Similar cabinet technology to ELYSIAN provides a stable and solid foundation for the drive units with radiused edges to help integrate the driver output with the room acoustics. In addition the unique SLPP bass reflex system, as developed for ELYSIAN, is now incorporated in EVO4.

Wharfedale’s new EVO4 has grown out of the extensive research and development that produced the ELYSIAN flagship loudspeakers and borrows much of the technology involved in ELYSIAN.

The primary focus is on the AMT development resulting in a radically different way of reproducing high frequency detail efficiently and accurately. Similar cabinet technology to ELYSIAN provides a stable and solid foundation for the drive units with radiused edges to help integrate the driver output with the room acoustics. In addition the unique SLPP bass reflex system, as developed for ELYSIAN, is now incorporated in EVO4.

Wharfedale’s new EVO4 has grown out of the extensive research and development that produced the ELYSIAN flagship loudspeakers and borrows much of the technology involved in ELYSIAN.

The primary focus is on the AMT development resulting in a radically different way of reproducing high frequency detail efficiently and accurately. Similar cabinet technology to ELYSIAN provides a stable and solid foundation for the drive units with radiused edges to help integrate the driver output with the room acoustics. In addition the unique SLPP bass reflex system, as developed for ELYSIAN, is now incorporated in EVO4.

A genuine example of luxury audio, ELYSIAN offers indulgence in design, materials aesthetic and performance. A thorough and no compromise approach has lead the Wharfedale engineers to create a benchmark in affordable, audiophile-grade luxury loudspeakers. Cutting edge design and class-leading technology are combined to deliver musical reproduction that will proudly challenge the world’s finest loudspeakers.
From the Piano-Lacquer finished cabinet, created with details of true craftsmanship, through to the AMT (Air Motion Transformer) high frequency transducers and European manufactured bass drivers, ELYSIAN represents a new standard in the world of home audio experiences.
The resultant sound, from the finely balanced driver selection and expert crossover design, matches the pristine design with a degree of natural transparency that will leave you breathless.
One for the connoisseur and one for the history books, ELYSIAN will leave you questioning, how is this possible in this price-class?

A genuine example of luxury audio, ELYSIAN offers indulgence in design, materials aesthetic and performance. A thorough and no compromise approach has lead the Wharfedale engineers to create a benchmark in affordable, audiophile-grade luxury loudspeakers. Cutting edge design and class-leading technology are combined to deliver musical reproduction that will proudly challenge the world’s finest loudspeakers.
From the Piano-Lacquer finished cabinet, created with details of true craftsmanship, through to the AMT (Air Motion Transformer) high frequency transducers and European manufactured bass drivers, ELYSIAN represents a new standard in the world of home audio experiences.
The resultant sound, from the finely balanced driver selection and expert crossover design, matches the pristine design with a degree of natural transparency that will leave you breathless.
One for the connoisseur and one for the history books, ELYSIAN will leave you questioning, how is this possible in this price-class?
ELYSIAN is truly an audio engineering work of art.